The YESIDO KR17 is a 2.4GHz wireless lavalier microphone system comprising two transmitters and one receiver, with a 600mAh charging case. Transmitter: digital silicon mic head, ceramic antenna, 32KHz sampling rate, 20Hz–20KHz frequency response, 20ms latency, 70mAh battery (~80min charge, 8hr use). Receiver: 600mAh charging case capacity. Transmission distance: 50m barrier-free. AI noise reduction chip. No certifications listed. Colour: Black. Includes 2× transmitter, 1× receiver, charging case, P4 cable, storage bag and English manual. Curated by Aetheo for recording and content creation.
Why you'll like it
- 2-transmitter system — record two audio sources simultaneously to one receiver
- 50m barrier-free range — 2.4GHz wireless transmission
- 20ms latency — low-delay audio for video recording synchronisation
- 8hr transmitter use — 70mAh battery per transmitter, ~80min charge time
- 600mAh charging case — recharges transmitters on the go
Designed for recording and content creation
The KR17 uses two transmitters (worn by speakers or clipped to clothing) that send audio to a single receiver connected to a camera, phone or recorder via the included P4 cable. The 2.4GHz frequency provides a 50m barrier-free transmission range. Each transmitter uses a digital silicon mic head with a ceramic antenna; AI noise reduction processing filters environmental background noise. The sampling rate is 32KHz with a 20Hz–20KHz frequency response range and 20ms latency — low enough for video recording without audible delay. Each transmitter's 70mAh battery provides approximately 8 hours of use per charge, with an ~80-minute charge time. The 600mAh charging case recharges both transmitters away from a mains socket. No certifications listed in source documentation. Curated by Aetheo for recording and content creation.
Key features
2-transmitter system — 2.4GHz, 50m
The KR17 includes two transmitters and one receiver — two audio sources can be captured simultaneously and combined into the receiver's output. The 2.4GHz wireless transmission provides a 50m barrier-free range. In environments with obstacles (walls, dense crowds), actual range will be reduced. The ceramic antenna design in each transmitter supports stable signal in the 2.4GHz band. The 2.4GHz band may experience interference from other 2.4GHz devices such as WiFi routers and Bluetooth in dense RF environments.
20ms latency — 32KHz sampling, 20Hz–20KHz response
The 20ms transmission latency allows audio and video recording without perceptible delay when combined in post-production or played back directly. The 32KHz sampling rate captures audio for voice recording and speech. The 20Hz–20KHz frequency response covers the full audible range. AI noise reduction in the transmitters reduces constant environmental background noise during capture.
Transmitter battery — 70mAh, ~8hr use, ~80min charge
Each transmitter has a 70mAh battery providing approximately 8 hours of use per charge. Charge time is approximately 80 minutes per transmitter. The transmitters charge via the 600mAh charging case — the case acts as a portable power bank for the transmitters. Full case capacity provides multiple recharge cycles for the transmitters when away from a mains socket.
600mAh charging case — P4 cable output
The 600mAh charging case stores and charges both transmitters when not in use. The case functions as a combined carry case and portable charger for the transmitters. The receiver connects to cameras, phones or recorders via the included P4 cable. A storage bag is included for carrying the full kit. The P4 cable connector type should be verified against the target recording device's input before purchase.
Best for
- Two-person interview or podcast recording — two transmitters to one receiver
- Content creators who need portable wireless mic recording without a mains socket
- 50m wireless range for event recording, presentations and outdoor content
- Low-latency audio capture — 20ms for video recording synchronisation
- 8hr transmitter battery life with portable recharging via the 600mAh charging case
What's included
- 2 × YESIDO KR17 Transmitter
- 1 × Receiver
- 1 × Charging Case (600mAh)
- 1 × P4 Cable
- 1 × Storage Bag
- 1 × English User Manual
Compatibility and setup
Mic type: digital silicon mic head. Antenna: ceramic. Sampling rate: 32KHz. Frequency: 2.4GHz. Response: 20Hz–20KHz. Latency: 20ms. Transmitter battery: 70mAh. Transmitter charge time: ~80min. Transmitter use time: ~8hr. Transmission range: 50m barrier-free. Charging case: 600mAh. Output: P4 cable (included). AI noise reduction: yes. Certifications: not listed. Colour: Black. Included: 2× transmitter, 1×
| Specification | Details |
|---|---|
| Brand | YESIDO |
| Model | KR17 |
| Mic Type | Digital silicon mic head |
| Antenna | Ceramic |
| Sampling Rate | 32KHz |
| Frequency | 2.4GHz |
| Response | 20Hz–20KHz |
| Latency | 20ms |
| Transmitter Battery | 70mAh |
| Transmitter Use Time | Approx. 8 hours |
| Transmitter Charge Time | Approx. 80 minutes |
| Range | 50m (barrier-free) |
| Charging Case | 600mAh |
| AI Noise Reduction | Yes |
| Output Cable | P4 (included) |
| Certifications | Not listed |
| Colour | Black |
| Included | 2× transmitter, 1× receiver, charging case, P4 cable, storage bag, English manual |